Climate controllers for chambers growing mushrooms
Climate Controller MR-2560_Z-90
Climate Controller MR-2560_Z-58
Climate Controller MR-1284_Z-58
Appointment.
The climate controllers MR-2560_Z-90, MR-2560_Z-58, MR-1284_Z-58 are designed for full-featured climate control in champignon, oyster mushroom and other types of mushrooms with similar technological requirements for growing.
They are installed on all types of industrial climatic systems, non-standard self-made climate systems, climate systems with air-conditioning cooling, climate systems with heating of heating elements, humidification by spraying water with injectors or steam inlet, and also on climate systems with incomplete functionality (without cooler).
Recommended for use both in large mushroom growing plants and on small private farms.
Three climate controllers for growing mushrooms vary in size, in the manner of installation, in the number of inputs for connecting sensors, in the number of outputs for connecting actuator actuators. The main functions of maintaining the climate in the controllers are the same.
Functional.
Controllers MR-2560_Z-90, MR-2560_Z-58, MR-1284_Z-58 contain a system of interconnected regulators: compost temperature regulator, air temperature regulator in the mushroom growing room, relative humidity regulator, CO2 concentration controller in air, regulator The fan speed of the air conditioner. Controllers maintain the set temperature of the compost, the temperature and humidity of the air in the growth chamber, the concentration of CO2 in the air of the chamber, the speed of air movement.
For this purpose, hot and cold water valves, steam crane, air recirculation jalousies, fresh air jalousies, air conditioner jalousies, frequency converter, hot and cold coolant pumps, humidifier valves, frequency converter starters, additional exhaust fan starters, sound and light signal relays .
The data of actual temperatures, relative humidity, CO2 concentration are taken from the installed sensors, data on the execution by the actuators of the assigned functions - from the feedback signals of the actuators actuators.
Display information on the LCD screen, and also send data through the modem to the personal page of the site in the form of climate status tables and in the form of graphs that can be viewed from any location using a mobile phone, smartphone or computer.
One or more controllers MR-2560_Z-90, MR-2560_Z-58, MR-1284_Z-58 can work independently or all together be connected to the computer for climate control from the office of a technologist, camera operator or via the Internet from anywhere in the world.
Connectable sensors:
- temperatures of compost (substrate) - 1 ... 6 pcs;
- air temperature inside the growing chamber - 1 ... 3 pcs;
- temperature of air supplied to the growing chamber by air conditioning system - 1 pc;
- atmospheric air temperature - 1 pc;
- relative humidity sensor (psychrometric method) - 1 pc;
- CO2 concentration sensor in the air of the growing chamber;
- gauge of excessive pressure (rarefaction) in the growing chamber.
Actuator actuators connected:
- frequency converter of the air conditioning fan;
- Venetian blinds;
- recirculation louvers;
- hot water coolant cock;
- cold coolant cock;
- a steam supply tap for humidification;
- air conditioning shutters;
- climate control relay;
- hot water supply pump relay;
- cold feed coolant pump relay;
- Humidifier injector valve relay;
- the relay of the additional fan of air of atmosphere;
- relay of sound or light alarm;
- daylight relay;
Connectable external devices:
- a personal computer for climate control remotely;
- GSM modem for observing the climate remotely (with the exception of MR-1284_Z-58);
Execution.
Controller MR-2560_Z-90
- dimensions 225x175x80 mm
- Mounted externally on the wall or inside the installation box
On the bottom panel there are hermovods for the power supply cable of the device, sensor cables, actuator cables and cigarization, communication cable with the computer. Connectors for connecting cables are located inside the device under the removable front panel.
Controller MR-2560_Z-58
- dimensions of 155x80x55 mm
- Mounted internally in the mounting box
The holes for the cable entries of the cables of the connected devices are located along the perimeter of the controller housing.
Controller MR-1284_Z-58
- dimensions of 155x80x55 mm
- Mounted internally in the mounting box
The holes for the cable entries of the connected devices are located on the top and bottom panels of the controller housing.
Housing.
The controller housings are made of high-strength plastic. Two versions of the body color: light gray or black.
Front Panel.
On the front panel of the device there are control buttons and a screen.
Screen.
The screen of the device is symbolic for 20 familiarity in 4 lines. Two screen options: a yellow background with black symbols or a blue background with white symbols.
Keyboard.
4-button keyboard provides switching between the windows of information output, editing of the given climate parameters, selection of the growing phases, etc.