Temperature sensor with terminal head
Connection type - three-wire
Diameter of immersion part - 8 mm
The length of the submerged part is 200 mm
Submerged material - stainless steel
Material of the terminal head - plastic
Cable gland - clamping threaded
Number of contacts involved - 3 pieces
Temperature sensor with cable
Connection type - three-wire
Diameter of immersion part - 8 mm
The length of the submerged part is 160 mm
The total length of the sensor body is 220 mm
Submerged material - high-strength plastic
Sensor Handle Material - Plastic
Cable gland - clamping threaded
Number of wires involved in the cable - 3 pieces
Color cable layouts:
1). Black - GND; Blue - Sens; Brown - VCC + 5V.
2). White - GND; Yellow - Sens; Red - VCC + 5V.
Cable length (standard) - 2.70 m
The type of connection of temperature sensors to the controller is parallel, all temperature sensors are connected in parallel with their signal lines to one temperature input of the controller.
Type of connection of temperature sensors to the switch - one sensor to one input of the switch.
For ease of installation of temperature sensors at the installation site, it is possible to manufacture a garland of sensors connected in parallel by soldering to the main trunk cable of the required length.